| Item No. |
Part Description |
 |
Solar Pak Anti-Theft Mounting Bracket
(Item #910)
-
Specifically
designed to easily and securely mount Parmak solar fence chargers to a
standard studded steel T-Post
-
Connects
directly to mounting holes already on the solar fence charger
-
Use
two #10 x 3/8” bolts, two #10 nuts, two 10 flat washers, and four #10
star washers to mount bracket to fence charger
-
Add
a padlock for theft deterrent
-
Heavy
zinc plating to prevent rust
-
Designed
for Parmak models DF-SP-LI and Mag12-SP
|
#901 |
6 Volt Gel Cell Battery for Solar Powered
Fencers.
(Models DF-SP-LI and DF-SP-SS)
Click Here for more battery information |
#902 |
12 Volt Gel Cell Battery for Solar Powered
Fencers.
(model Mag12 SP)
Click Here for more battery information |
#920 |
6 Volt Solar Panel
Replacement
Pre-mounted on a new lid. Simply remove your old panel
and lid, disconnect battery and wire splicers and replace with new panel and
wire splicers (included).
(Models DF-SP-LI and DF-SS-LI) |
#960 |
12 Volt Solar Panel Replacement
Pre-mounted on a new lid. Simply remove your old panel
and lid, disconnect battery and wire splicers and replace with new panel and
wire splicers (included).
(Model Mag12 SP) |
#951 |
6 Volt Taper Charger for 6 Volt Gel Cell
Battery
Planning on storing your solar
charger? We recommend that you remove the battery and charge it at
least once a month to keep the battery fully charged and ready to go when
you are ready to use your solar charger again. Works with 6 volt battery model
#901.Click Here for more battery
information |
#952 |
12 Volt Taper Charger for 12 Volt Gel Cell
Battery
Planning on storing your solar
charger? We recommend that you remove the battery and charge it at
least once a month to keep it fully charged and ready to go when you are
ready to use your solar charger again. Works with 12 volt battery model
#902.Click Here for more battery
information |
Electro-Gard
Available at your leading farm supply
store.
|
ELECTRO-GARD
Lightning Protector
Protect your 110-120
volt operated electric fencer from lightning damage. Also protect
computers, TV’s and other sensitive solid state equipment. Today’s
delicate electronic equipment DOES need this protection.
Just plug ELECTRO-GARD into any 110-120 volt outlet.
Operational light indicates ELECTRO-GARD is “on the job”. Limits high
voltage spikes to 350 volts and can absorb up to 34watts of transient
power.
|
